Creative Pradeep The Home Of Electronics

VIDEO LINK:     Watch Video COMPONENTS REQUIRED: 1.ARDUINO NANO 2.MPU6050 3.OLED DISPLAY 4.6 LED 5.BUZZER 6.BREAD BOARD 7.WIRES CODE:   Click here to Download Code CIRCUIT DIAGRAM: CHANNEL LINK: https://youtube.com/c/CreativePradeep

  VIDEO LINK:  Click Here to Watch Video COMPONENTS REQUIRED: 1.ARDUINO NANO 2.VIBRATION SENSOR 3.LED 4.BUZZER 5.BREADBOARD 6.WIRES CODE: Download Code CIRCUIT DIAGRAM: CHANNEL LINK: https://youtube.com/c/CreativePradeep

  VIDEO LINK: Arduino Password based locker system COMPONENTS REQUIRED: 1.ARDUINO UNO 2.4X4 KEYPAD  3.12V SOLENOID LOCK 4.5V RELAY MODULE 5.12V BATTERY CODE: Click here to Download Code CIRCUIT DIAGRAM: CHANNEL LINK: https://youtube.com/c/CreativePradeep

  VIDEO: VIDEO LINK: https://youtu.be/dVWisvdzj5I COMPONENTS REQUIRED: 1.ESP32 2.12V SOLENOID LOCK 3.5V RELAY MODULE 4.WIRES 5.BATTERY CIRCUIT DIAGRAM: 1. Vcc of relay to 3v of esp32 2.Gnd to Gnd 3.Signal pin of relay to D23 pin of esp32 Blynk App Setting: First select a switch and select the virtual pin V1 for that switch then click on ok CODE: https://docs.google.com/document/d/1XYxz6jcs-zJjwO9RT5ND8UxTQSkNdYqc7UR5PlpOId4/edit?usp=drivesdk CHANNEL LINK: https://youtube.com/c/CreativePradeep

 VIDEO: VIDEO LINK:     https://youtu.be/Z4Xwcqkirqs COMPONENTS REQUIRED: 1.ESP32 DEV BOARD 2.5V 2CHANNEL RELAY MODULE 3.PUSHBUTTON MODULE 4. AC BULB CODE: //CREATIVE PRADEEP// // ESP32 BLYNK & MANUAL Home Automation System #include <BlynkSimpleEsp32.h> BlynkTimer timer; // define the GPIO connected with Relays and switches #define RelayPin1 23  //D23 #define RelayPin2 22  //D22 #define RelayPin3 21  //D21 #define RelayPin4 19  //D19 #define RelayPin5 18  //D18 #define RelayPin6 5   //D5 #define RelayPin7 25  //D25 #define RelayPin8 26  //D26 #define SwitchPin1 13  //D13 #define SwitchPin2 12  //D12 #define SwitchPin3 14  //D14 #define SwitchPin4 27  //D27 #define SwitchPin5 33  //D33 #define SwitchPin6 32  //D32 #define SwitchPin7 15  //D15 #define SwitchPin8 4   //D4 #define wifiLed    2   //D2 #define VPIN_BUTTON_1    V1  #define VPIN_B...

 VIDEO: VIDEO LINK:      https://youtu.be/gHcLZJQVcI0 Open Arduino droid app in mobile and write the code and click on settings and select board type and click esp32 in that click esp32 dev board now compile the code and upload the code. BLINKING CODE: //CREATIVE PRADEEP// int LED_BUILTIN = 2; void setup() { pinMode (LED_BUILTIN, OUTPUT); } void loop() { digitalWrite(LED_BUILTIN, HIGH); delay(1000); digitalWrite(LED_BUILTIN, LOW); delay(1000); } CHANNEL LINK:  www.youtube.com/c/CreativePradeep

 VIDEO: VIDEO LINK:    https://youtu.be/Xxs-a0JTmcA COMPONENTS REQUIRED: 1.JOYSTICK MODULE 2.ARDUINO NANO 3.SERVO MOTOR 4.BREAD BOARD 5.JUMER CABLES CODE: //CREATIVE PRADEEP// #include <Servo.h> const int Y_pin = A0; // analog pin connected to Y output Servo myservo;   int val;     void setup() {   myservo.attach(7);  } void loop() {   val = analogRead(Y_pin);               val = map(val, 0, 1023, 0, 180);        myservo.write(val);                     delay(15);                            } CIRCUIT DIAGRAM: CHANNEL LINK:                       www.youtube.com/c/CreativePradeep