SOUND REACTIVE LED

-



 VIDEO:


  VIDEO LINK:                            https://youtu.be/ngv5kF2EpzQ


CODE:

//CREATIVE PRADEEP THE HOME OF ELECTRONICS//
int soundSensor = 2;

int LED = 3;


void setup()

{


  pinMode (soundSensor, INPUT);

  pinMode (LED, OUTPUT);

}


void loop()

{

  int statusSensor = digitalRead (soundSensor);

 

  if (statusSensor == 1)

  {

    digitalWrite(LED, HIGH);

  }

 

  else

  {

    digitalWrite(LED, LOW);

  }

 

}

CIRCUIT DIAGRAM:


 

                  CHANNEL LINK:            https://youtube.com/c/CreativePradeep


Comments

Post a Comment

Popular posts from this blog

SMART WIFI CONTROLLED DOOR LOCK SYSTEM USING ESP32

-
Image
  VIDEO: VIDEO LINK: https://youtu.be/dVWisvdzj5I COMPONENTS REQUIRED: 1.ESP32 2.12V SOLENOID LOCK 3.5V RELAY MODULE 4.WIRES 5.BATTERY CIRCUIT DIAGRAM: 1. Vcc of relay to 3v of esp32 2.Gnd to Gnd 3.Signal pin of relay to D23 pin of esp32 Blynk App Setting: First select a switch and select the virtual pin V1 for that switch then click on ok CODE: https://docs.google.com/document/d/1XYxz6jcs-zJjwO9RT5ND8UxTQSkNdYqc7UR5PlpOId4/edit?usp=drivesdk CHANNEL LINK: https://youtube.com/c/CreativePradeep
Read more

ARDUINO PULSEOXIMETER

-
Image
     VIDEO: VIDEO LINK:                             https://youtu.be/ssOLHjx0Axo COMPONENTS REQUIRED: 1.ARDUINO NANO 2.MAX30100 PULSEOXISENSOR 3.4.7K RESISTOR 4.OLED DISPLAY 5.BREAD BOARD CODE: //CREATIVE PRADEEP// //ARDEUINO PULSEOXIMETER// #include <Wire.h> #include "MAX30100_PulseOximeter.h" #include <Adafruit_GFX.h> #include <Adafruit_SSD1306.h> #define ENABLE_MAX30100 1 #define SCREEN_WIDTH 128 // OLED display width, in pixels #define SCREEN_HEIGHT 32 //64 // OLED display height, in pixels // Declaration for an SSD1306 display connected to I2C (SDA, SCL pins) // The pins for I2C are defined by the Wire-library. // On an arduino UNO:       A4(SDA), A5(SCL) // On an arduino MEGA 2560: 20(SDA), 21(SCL) // On an arduino LEONARDO:   2(SDA),  3(SCL), ... #define OLED_RESET    4 // 4 // Reset pin # (or -1 if sharing Arduino reset pin) #d...
Read more